SEALANTS

Electrical Sealants:

 
Chem Seal Sealants
Specifications
Product Description and Use
Materials Safety Data Sheets
CS 3100 Mil-PRF-8516G Potting & Sealing Compound for sealing and moisture proofing adhesive bonded structures.  Available in three application times and three consistencies.

MSDS-CS3100 - Part A

MSDS-CS3100 - Part B

CS 3100M STM-M225-5 Potting & Sealing Compound for sealing and moisture proofing adhesive bonded structures.  Available in three application times and three consistencies.  
CS 3104M 131208-27, modified Mil-PRF-8516G to Flamemaster Specification Low Adhesive Potting Compound similar to CS 3100 with the exception of Low Adhesion.  Its low adhesive strength makes it possible to remove the encapsulating material from connections.  
CS 3209

STM 40-109 Rev. C

CMNPO94 TY XV

Electrically Conductive Sealant - Used as a faying surface sealant.  Meets all the requirements of   AMS-S- 8802.  Designed to conduct static electricity. 

MSDS-CS3209 - Part A

MSDS-CS3209 - Part B

CS3802

Pratt & Whitney TS10425

Areojet - AGC 34076

Room Temperature Silicone is used as an insulating coating and thermal barrier in missile applications where heat transfer must be retarded.

MSDS-CS3802 - Part A

MSDS-CS3802 - Part B

CS 3808

BMS-8-68 (Boeing)

MMS M138 Rev. 13

Room Temperature Silicone chemically cured.  Used for aircraft, missile and electronic applications. 

MSDS-CS3808 - Part A

MSDS-CS3808 - Part B

Aircraft Fuel Tanks & Pressure Cabin Sealants :

 
Chem Seal Sealants
Specifications
Product Description and Use
Materials Safety Data Sheets
CS 1900 Mil-S-38249 Type I Firewall Sealant Used for sealing firewall structures.  It is elastomeric and is able to withstand intermittent temperatures of up to 2000 deg. F. 

MSDS-CS1900 - Part A

MSDS-CS1900 - Part B

CS 2415

DMS 1819C, Mil-S-38228 Cl A, Cl B, STM40-006 Class A

Aluminum Exterior Sealant recommended for sealing external seams, depressions and gaps on aircraft to yield weather tightness and achieve aerodynamic smoothness.  Withstands jet fuels and weathering.  Available in Application Times of 1/2 hour and 2 hours. 

MSDS-CS2415 - Part A

MSDS-CS2415 - Part B

CS 3105 Flamemaster Specification  8030-01-469-7150 Junction Box Sealer - Thixotropic, polysulfide sealant suitable for use in edge seal encapsulation.  Easily applied with an extrusion gun or spatula.  
CS 3201 AMS 7124 formerly Mil-S-7124 & Mil-S-7502 Sealing Compound - For aircraft Structures.  Cures at room temperature to a flexible resilient rubber with excellent adhesion to metals. Available Class A and Class B various application times.   Colors - Tan or Black

MSDS-CS3201 CL. A- Part A

MSDS-CS3201 CL. A- Part B

MSDS-CS3201 CL. B- Part A

MSDS-CS3201 CL. B- Part B

CS 3204 CLASSA & B

AMS-S-8802 formerly Mil-S-8802F
Type II
Integral Fuel Tank Sealant Designed to withstand the attack of sulfur compounds present in jet fuels.  Also used as pressurized cabin sealant.

MSDS-CS3204 CL. A- Part A

MSDS-CS3204 CL. A- Part B

MSDS-CS3204 CL. B- Part A

MSDS-CS3204 CL. B- Part B

CS 3204R AMS-S-8802 formerly Mil-S-8802F
Type II
Integral Fuel Tank Sealant Designed to withstand the attack of sulfur compounds present in jet fuels. Also used as pressurized cabin sealant. This is a rapid curing material.

MSDS-CS3204R CL A- Part A

MSDS-CS3204R Cl. A- Part B

MSDS-CS3204R CL B- Part A

MSDS-CS3204R CL. B- Part B

  CS 3205 AMS-S-8802 (Type I) Integral Fuel Tank Sealant - dichromate cured polysulfide base compound. Type-1 AMS-S-8802 material will readily cure in the absence of humidity and therefore ideal for application in dry or desert climates. This material has a higher overall performance then the Type -2 material.

MSDS-CS3205 CL B- Part A

MSDS-CS3205 CL. B- Part B

CS 3210 STM 40 107 Low Density Pressurized Cabin Sealant.  The low specific gravity of 1.00 can result in substantial weight savings over conventional sealant.

MSDS-CS3210 CL. B- Part A

MSDS-CS3210 CL. B- Part B

CS 3213 MIL-PRF-81733 Corrosion Inhibitive Sealant. A corrosion inhibitive sealant for use in the sealing and coating of metal components on weapons and aircraft systems for protection against corrosion when subject to contact with water and/or weathering.

MSDS-CS3213 CL. A- Part A

MSDS-CS3213 CL. A- Part B

MSDS-CS3213 CL. B- Part A

MSDS-CS3213 CL. B- Part B

MSDS-CS3213 CL. C- Part A

MSDS-CS3213 CL. C- Part B

CS 3247 AMS 3333 Windshield Sealant. A windshield sealant for use when setting or repairing windshields and transparencies of Glass, Acrylic, or Polycarbonate in composite or metal frames.

MSDS-CS3247 CL. B- Part A

MSDS-CS3247 CL. B- Part B

CS 3330 CLASS A AMS 3284 Type 1
Formerly Mil-S-8784B
Access Door Sealant Used as a strippable fillet for integral fuel tanks and pressurized cabins, as a strippable fillet and as a gasket for removable parts.  Available Class A or Class B, 1/2 hr. or 2 hrs.

MSDS-CS3330 CL. A- Part A

MSDS-CS3330 CL. A- Part B

MSDS-CS3330 CL. B- Part A

MSDS-CS3330 CL. B- Part B

CS 3330 CLASS B
CS 3330 Cl CLASS A AMS 3284 Type 2 Corrosion Inhibitive Access Door Sealant - A non chromate Corrosion inhibiting sealant, used as an access door sealant for integral fuel tanks and pressurized cabins, as a strippable fillet and as a gasket for removable parts. 

 

MSDS-CS3330CI CL. B- Part A

MSDS-CS3330CI CL. B- Part B

CS 3330 Cl CLASS B
CS 3600 AMS 4383 formerly  Mil-S-4383C (2) Top Coat & Adhesive - Fuel tank, Buna N Type and high bond strength adhesive.  Protective coating for synthetic rubber sealant and metal surfaces of integral fuel tanks.  Protection against oils, fuels, fresh or salt water, corrosion and weathering. MSDS-CS3600 One Part
CS 5306 AMS 3277 Type I 
Formerly Mil-S-29574

AMS 3277 Type II -
No Primer  required formerly Mil-S-29574
Polythioether Quick Repair Fuel Sealant - Used on aircraft to yield weather tightness and fuel resistant seal.  Able to cure at lower temperatures.  Faster than standard sealant.  CS 5310 Class B-2, CS 5306 Class A & Class B available 1/4 hr. & 1/2 hr.  CS 5311 available Class A and Class B, 2 hr. 1/2 hr. and 1/4 hr.

MSDS-CS5306 CL. A- Part A

MSDS-CS5306 CL. B- Part A

MSDS-CS5306 CL.A & B- Part B

MSDS-CS5306 PRIMER

CS 5310
CS 5311
CS 5447 Flamemaster  Specification Polythioether Windshield Sealant Fast Cure- High temperature sealant.  Developed for the installation and sealing of windshield and transparencies on high-speed aircraft.

MSDS-CS5447 - Part A

MSDS-CS5447 - Part B

MSDS-CS5447 - 9960 PRIMER

CS 5500 CLASS A AMS 3276 Formerly Mil-S-83430, FMS 1044, FMS 3055 High Temperature Fuel Tank & Fuselage - Used for sealing fuel tanks and on aircraft fuselage.  Withstands higher temperatures than the standard AMS-S-8802 sealant.  Available in Class A or Class B, with various application times. 

MSDS-CS5500 CL. A- Part A

MSDS-CS5500 CL. A- Part B

MSDS-CS5500 CL. B- Part A

MSDS-CS5500 CL. B- Part B

CS 5500 CLASS B
CS 5500 CI

AMS3265
FMS 3104 Formerly
FMS 3055-1

Corrosion Inhibitive Sealant - Permapol P5 polymer, High temperature, sealant - Non chromated.  Will be used to replace Mil-S-81733 in some applications.

MSDS-CS5500CI CL. A- Part A

MSDS-CS5500CI CL. A- Part B

MSDS-CS5500CI CL. B- Part A

MSDS-CS5500CI CL. B- Part B

CS 5530 Flamemaster Specification Test to AMS 3281  High Temperature Low Density Fuel & Fuselage - High temperature resistant Low Density Sealant.  Fuel tank and fuselage sealant.   Density 1.3  
CS 5547 Flamemaster Specification Aircraft Windshield Sealant - Room Temperature cure, high temperature sealant.  Used when installing and sealing windshields and transparencies.

MSDS-CS5547 CL. B- Part A

MSDS-CS5547 CL. B- Part B

Special Sealants:

 
Chem Seal Sealants
Specifications
Product Description and Use
Materials Safety Data Sheets
CS 91 STM 40-601 Epoxy Sealant Compound - Used for sealing and moisture proofing adhesive bonded structures.  Available in three consistencies.

MSDS-CS91 Type I-A

MSDS-CS91 Type I-B

MSDS-CS91 Type II-A

MSDS-CS91 Type II-B

MSDS-CS91 Type III-A

MSDS-CS91 Type III-B

CS 2305 Meets Florida EPA requirements Barrier Coating - Used for tank farms, refineries, oil fields, marine tankers and cargo ships.  Designed to protect steel surfaces against corrosion.  Used as a pour in place liner to protect ground water from contamination.  
CS 2725 DOD-C-24176   Type I and II Epoxy Bonding Compound - High adhesion to most construction materials.  Used for repairing spalled and cracked areas in concrete, plaster, stucco, stone, slate, wood and tile.  Also used as a mortar for ceramic tile, stone work, block and brick.

MSDS-CS2725 Part A

MSDS-CS2725 Part B

CS 2727 Air Force Spec. Flexible Epoxy Joint Sealer - Used as concrete joint sealer.  Excellent adhesion to concrete, wood and other materials without primer.  Lox compatible.

MSDS-CS2727 Part A

MSDS-CS2727 Part B

CS 3202 Mil-S-11031B
AA 59293
Optical Sealing Compound - Used for bonding glass to metal in optical instruments or fire control instruments.  Standard application time about 3 hours. 

MSDS-CS3202 Part A

MSDS-CS3202 Part B

CS 3204 WT MIS-31868C Weld Through Sealant - Conductive, Fuel resistant faying surface sealant for metal parts joined by spot welding.   
CS 3810 Various Company Specs. Low Density Silicone Thermal Barrier - Easily applied, heavy coating to be used in areas where thermal insulation is required. Excellent adhesion, high electrical insulation properties, short term high temperature exposure to 600 deg. F or more.

MSDS-CS3810 Part A

MSDS-CS3810 Part B

CS 7707 DPM 2389 Nylon Epoxy Coating - Used as a coating on flexible, semi rigid and rigid substrates for protection against Skydrol, hydraulic fluids, fuels, oils, salt water and ozone.

MSDS-CS7707 Part A

MSDS-CS7707 Part B

MSDS-CS7707 Part C

CS 9903 Mil-P-47215, MMS-K328 Primer - Used for bonding room temperature vulcanizing silicones to carious substrates. Also, used to prime other rigid surfaces such as glass, epoxy, and polyester. MSDS-C9903
CS 9943 Lockheed Martin Tack Free Accelerator - Accelerates the cure on the surface of the sealant, forming a thin skin which quickly becomes tack free. Eliminates problems of adherence of metal chips, dust etc. from airborne contaminates. MSDS-C9943
CS 9960 Flamemaster Specification Primer - Plastics - Used to prime some surfaces for potting compounds. Also used to prime windshield surfaces prior to the application of sealant. MSDS-C9960

Send e-mail to information@flamemaster.com with questions or comments about this web site.
Copyright © 1997 Flamemaster Corporation